tugas membuat iklan di docs dan slide

https://drive.google.com/drive/folders/1JroXzNQMjSaaNGn85fLrjp-Q6JtSG9Dp?usp=sharing 

 

Cara Membuat Kuisoner

Setelah Anda sudah memiliki akun Google berupal e-mail dari Gmail, maka Anda bisa membuka web browser.

 

1. Pilih Template

Setelah Anda memasuki Google Docs, Anda akan dihadapkan beberapa pilihan template. Jika tidak ada template yang sesuai maka Anda bisa memilih “blank” dengan gambar “ + “ background putih. Klik langsung pada tanda “ + “ tersebut.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Mengisi Title dan Form Description

Sudah memasuki Google Docs dan memilih template blank, kini saatnya untuk Anda mengisi kebutuhan kuisoner yang Anda butuhkan. Anda akan melihat kolom “Untitled Form” dengan huruf yang cukup besar. Anda bisa mengkliknya dan mengetikan judul dari kuisoner yang akan Anda buat.

Setelah Anda mengisi judul perhatikanlah bagian bawah judul terdapat “Form description.” Anda bisa memaparkan secara deskriptif mengenai kuisoner yang Anda buat. Buatlah deskripsi yang jelas sehingga membuat orang mudah memahami tujuan kuisoner yang Anda buat.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Membuat Pertanyaan

Jika Anda sudah selesai menentukan judul dan deskripsi dari kuisoner, kini Anda sudah bisa memasuki tahap mengajukan pertanyaan untuk kuisoner Anda. Pada bagian bawah “form description” ada yang namanya “Question.” Anda bisa mengetikan pertanyaan yang Anda inginkan.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selain itu juga Anda bisa memilih jenis pertanyaan yang ingin Anda ajukan. Misalnya, Anda hanya butuh pertanyaan dengan jawaban “ya,” “tidak,” atau “mungkin.” Maka Anda bisa memilih jenis pertanyaan “Multiple Choice.” Namun jika Anda menginginkan pertanyaan dengan jawaban yang mengharuskan menulis jawaban berupa deskripsi, Anda bisa memilih “short answer” atau “paragraph.”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Membuat Pertanyaan dengan Jawaban Multiple Choice

Bagi Anda yang memilih pertanyaan dengan Multiple Choice, tentu harus mempersiapkan jawabannya. Misalnya Anda hanya membutuhkan jawaban “ya, tidak, dan mungkin” maka tulislah dalam kolom “add option” untuk menuliskan jawaban “ya.”

Jika Anda ingin membuat jawaban lainnya, Anda hanya perlu mengklik “Add another” pada bagian samping “add option.” Anda bisa mengikuti step yang sama seperti ini untuk membuat jenis pertanyaan Checkboxes dan Dropdown.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Membuat Pertanyaan dengan Jawaban Short Answer dan Paragraph

Jika sebelumnya Anda membuat pertanyaan dengan jawaban yang sudah Anda maka kali ini para pengisi kuisoner harus menuliskan jawabannya sendiri. Anda bisa membuat pertanyaan dengan memilih “Short Answer” atau “paragraph.”

 

Apa perbedaannya? Jika “Short Answer” hanya bisa mengetikan beberapa kata saja. Namun untuk jenis “paragraph” para kuisoner bisa menuliskan jawaban dengan panjang lebar. Cara membuat Google Form untuk kuisoner berupa short answer dan paragraph cukup mudah. Anda hanya perlu menuliskan pertanyaannya saja dan pilihlah jenis “Short Answer” atau “paragraph.”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Kirim Kuisonernya Sekarang!

Setelah Anda merasa sudah lengkap dengan semua pertanyaannya, maka langkah terakhir adalah mengirimkan kuisoner kepada orang yang Anda pilih. Anda bisa mengirimnya menggunakan email secara langsung ataupun mengcopy link Google Form yang sudah Anda buat. Pertama, Anda bisa mengklik “send” yang ada pada bagian kanan atas.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setelah itu Anda akan diberikan pilihan untuk mengirim Form dengan menggunakan e-mail. Anda bisa menuliskan alamat email yang ingin Anda kirim dan klik “include form in email.” Lalu, Anda bisa langsung klik “send” yang ada di kanan bawah.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Anda juga bisa melakukan copy paste untuk mengirimkan link kuisoner yang telah Anda buat. Anda hanya perlu mengklik simbol seperti “peniti” kemudian akan muncul link yang bisa Anda copy. Jika link dirasa terlalu panjang, Anda bisa memperpendeknya dengan mengklik “Shorten URL.” Setelah itu copy-lah link yang sudah tersedia.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tutorial about Printer Sharing

 

Tutorial about Printer Sharing

1.   Buka control panel dari start menu

2.   Kemudian pilih Netword and Internet

3.   Selanjutnya klik Netword and Sharing Center

4.   Kemudian pilih Change Advanced Sharing Setting

5.   Pada bagian File and printer sharing pastikan dalam keadaan “Turn on file and printer sharing”

6.   Kemudian Scroll kebawah cari Password protected sharing  pilih “Turn of password protected sharing”. Tujuannya agar printer yang sudah di share dapat digunakan komputer lain tanpa harus memasukkan password.

7.   Jika sudah klik Save Changes untuk menyimpan perubahan.

Setelah mengaktifkan pengaturan File and printer sharing, selanjutnya melakukan sharing printer. Pastikan driver printer sudah terinstal dan komputer bisa melakukan print dengan normal, coba test print dahulu untuk memastikannya.

Ikuti langkah-langkah sharing printer dibawah ini dan terapkan di komputer yang terhubung langsung dengan printernya.

Cara sharing printer ke komputer lain

1.   Buka Devices and Printers dari Start Menu

2.   Klik kanan pada Model Printer yang akan di sharing dan pilih Printer Properties

3.   Maka akan tampil jendela properties dari printer nya

4.   Kemudian pilih tab Sharing dan aktifkan ceklis pada bagian “Share this printer”

5.   klik Apply dan Ok untuk menyimpan settingan

Pada tahap ini printer sudah selesai di share dan siap digunakan, selanjutnya kita hanya perlu menghubungkannya agar bisa digunakan di komputer lain.

Perlu diingat syarat utama agar komputer atau laptop lain bisa tersambung dengan printer yang sudah di share yaitu harus berada di satu jaringan yang sama.

Cara menghubungkan printer yang sudah di share

1.   Aktifkan juga File and printer sharing di komputer yang akan mengakses printer yang sudah di share.

2.   Buka My Computer atau File Exlorer dari Start Menu bisa juga dengan menekan logo windows + E secara bersamaan kemudian pilih Network di sebelah kiri bawah.

3.   Cari nama komputer yang terhubung dengan printer, buka dengan cara klik 2x pada nama komputer nya

4.   Maka akan tampil printer yang sudah di share tadi, klik kanan dan pilih Connect, komputer akan otomatis menginstal driver nya.

5.   Selesai, kamu sudah bisa menggunakan printer sharing tersebut. Pilih nama printernya saat mencetak dokumen.

 

Tutorial about Topology of Network

Short Tutorial on the various network components

Common physical Network topology’s

SEPTEMBER 8, 2015 LEAVE A COMMENT

Short video  for you guys to gain a better understanding !

Physical Topology – Hybrid Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Hybrid Topology

Hybrid networks use a combination of any two or more topology’s, in such a way that the resulting network does not exhibit one of the standard topology’s (e.g., bus, star, ring, etc.). For example, a tree network connected to a tree network is still a tree network topology. A hybrid topology is always produced when two different basic network topologies are connected. Two common examples for Hybrid network are: star ring network and star bus network

Physical Topology – Mesh Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Mesh Topology

           

In a mesh network, devices are connected with many redundant interconnections between network nodes. In a true mesh topology every node has a connection to every other node in the network.

Physical Topology – Hierarchical Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Hierarchical Topology

A type of network topology in which a network that is based upon the physical star topology has one or more repeaters between the central node and the peripheral or ‘spoke’ nodes, the repeaters being used to extend the maximum transmission distance of the point-to-point links between the central node and the peripheral nodes beyond that which is supported by the transmitter power of the central node or beyond that which is supported by the standard upon which the physical layer of the physical star network is based.

Physical Topology – Star Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Star Topology

             

In local area networks with a star topology, each network host is connected to a central hub with a point-to-point connection. So it can be said that every computer is indirectly connected to every other node with the help of the hub. In Star topology every node (computer workstation or any other peripheral) is connected to a central node called hub, router or switch. The switch is the server and the peripherals are the clients. The network does not necessarily have to resemble a star to be classified as a star network, but all of the nodes on the network must be connected to one central device.

Physical Topology – Ring Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Ring Topology

              

A network topology is set up in a circular fashion in such a way that they make a closed loop. This way data travels around the ring in one direction and each device on the ring acts as a repeater to keep the signal strong as it travels. Each device incorporates a receiver for the incoming signal and a transmitter to send the data on to the next device in the ring. The network is dependent on the ability of the signal to travel around the ring. When a device sends data, it must travel through each device on the ring until it reaches its destination. Every node is a critical link. In a ring topology, there is no server computer present; all nodes work as a server and repeat the signal. The disadvantage of this topology is that if one node stops working, the entire network is affected or stops working.

Physical Topology – Bus Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Bus Topology

             

In local area networks where bus topology is used, each node is connected to a single cable, by the help of interface connectors.This central cable is the backbone of the network and is known as the bus (thus the name). A signal from the source travels in both directions to all machines connected on the bus cable until it finds the intended recipient. If the machine address does not match the intended address for the data, the machine ignores the data. Alternatively, if the data matches the machine address, the data is accepted. Because the bus topology consists of only one wire, it is rather inexpensive to implement when compared to other topologies. However, the low cost of implementing the technology is offset by the high cost of managing the network

Logical Topology In Detail

SEPTEMBER 7, 2015 LEAVE A COMMENT

The two most common types of Logical Topology’s are Broadcast and Token passing.

·         Broadcast Topology– A host broadcasts a message to all hosts on the same network segment. There is no order that hosts must follow to transmit data and messages are sent on a First In, First out (FIFO).

·         Token passing– Controls network access by passing an electronic sequentially to each host. When a host receives a token, it can send data on the network.

Two Types Of Topology’s

SEPTEMBER 7, 2015 LEAVE A COMMENT

There are two basic categories of network topology’s:

Physical topology’s and Logical topology’s.

Physical Topology: Physical topology is the physical layout of the components on a network. The cabling layout used to link devices is known as the physical topology of the network. This refers to the layout of cabling, the locations of nodes, and the interconnections between the nodes and the cabling. The physical topology of a network is determined by the capabilities of the network access devices and media, the level of control or fault tolerance desired, and the cost associated with cabling or telecommunications circuits.

Logical Topology: Determines how the hosts access the medium to communicate across the network. The logical topology in contrast, is the way that the signals act on the network media, or the way that the data passes through the network from one device to the next without regard to the physical interconnection of the devices. A network’s logical topology is not necessarily the same as its physical topology.

Reasons For Using Network Topology’s

SEPTEMBER 7, 2015 LEAVE A COMMENT

So why does network topology matter ? A few reasons are as follows:

·         The Network Topology affects the Performance.

·         The network topology is a factor in determining the media type used to cable the network.

·         The network topology impacts the cost of cabling the network.

·         Some access methods may only work with specific topo

Common physical Network topology’s

SEPTEMBER 8, 2015 LEAVE A COMMENT

Short video  for you guys to gain a better understanding !

Physical Topology – Hybrid Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Hybrid Topology

Hybrid networks use a combination of any two or more topology’s, in such a way that the resulting network does not exhibit one of the standard topology’s (e.g., bus, star, ring, etc.). For example, a tree network connected to a tree network is still a tree network topology. A hybrid topology is always produced when two different basic network topologies are connected. Two common examples for Hybrid network are: star ring network and star bus network

Physical Topology – Mesh Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Mesh Topology

           

In a mesh network, devices are connected with many redundant interconnections between network nodes. In a true mesh topology every node has a connection to every other node in the network.

Physical Topology – Hierarchical Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Hierarchical Topology

A type of network topology in which a network that is based upon the physical star topology has one or more repeaters between the central node and the peripheral or ‘spoke’ nodes, the repeaters being used to extend the maximum transmission distance of the point-to-point links between the central node and the peripheral nodes beyond that which is supported by the transmitter power of the central node or beyond that which is supported by the standard upon which the physical layer of the physical star network is based.

Physical Topology – Star Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Star Topology

             

In local area networks with a star topology, each network host is connected to a central hub with a point-to-point connection. So it can be said that every computer is indirectly connected to every other node with the help of the hub. In Star topology every node (computer workstation or any other peripheral) is connected to a central node called hub, router or switch. The switch is the server and the peripherals are the clients. The network does not necessarily have to resemble a star to be classified as a star network, but all of the nodes on the network must be connected to one central device.

Physical Topology – Ring Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Ring Topology

              

A network topology is set up in a circular fashion in such a way that they make a closed loop. This way data travels around the ring in one direction and each device on the ring acts as a repeater to keep the signal strong as it travels. Each device incorporates a receiver for the incoming signal and a transmitter to send the data on to the next device in the ring. The network is dependent on the ability of the signal to travel around the ring. When a device sends data, it must travel through each device on the ring until it reaches its destination. Every node is a critical link. In a ring topology, there is no server computer present; all nodes work as a server and repeat the signal. The disadvantage of this topology is that if one node stops working, the entire network is affected or stops working.

Physical Topology – Bus Topology

SEPTEMBER 7, 2015 LEAVE A COMMENT

Bus Topology

             

In local area networks where bus topology is used, each node is connected to a single cable, by the help of interface connectors.This central cable is the backbone of the network and is known as the bus (thus the name). A signal from the source travels in both directions to all machines connected on the bus cable until it finds the intended recipient. If the machine address does not match the intended address for the data, the machine ignores the data. Alternatively, if the data matches the machine address, the data is accepted. Because the bus topology consists of only one wire, it is rather inexpensive to implement when compared to other topologies. However, the low cost of implementing the technology is offset by the high cost of managing the network

Logical Topology In Detail

SEPTEMBER 7, 2015 LEAVE A COMMENT

The two most common types of Logical Topology’s are Broadcast and Token passing.

·         Broadcast Topology– A host broadcasts a message to all hosts on the same network segment. There is no order that hosts must follow to transmit data and messages are sent on a First In, First out (FIFO).

·         Token passing– Controls network access by passing an electronic sequentially to each host. When a host receives a token, it can send data on the network.

Two Types Of Topology’s

SEPTEMBER 7, 2015 LEAVE A COMMENT

There are two basic categories of network topology’s:

Physical topology’s and Logical topology’s.

Physical Topology: Physical topology is the physical layout of the components on a network. The cabling layout used to link devices is known as the physical topology of the network. This refers to the layout of cabling, the locations of nodes, and the interconnections between the nodes and the cabling. The physical topology of a network is determined by the capabilities of the network access devices and media, the level of control or fault tolerance desired, and the cost associated with cabling or telecommunications circuits.

Logical Topology: Determines how the hosts access the medium to communicate across the network. The logical topology in contrast, is the way that the signals act on the network media, or the way that the data passes through the network from one device to the next without regard to the physical interconnection of the devices. A network’s logical topology is not necessarily the same as its physical topology.

Reasons For Using Network Topology’s

SEPTEMBER 7, 2015 LEAVE A COMMENT

So why does network topology matter ? A few reasons are as follows:

·         The Network Topology affects the Performance.

·         The network topology is a factor in determining the media type used to cable the network.

·         The network topology impacts the cost of cabling the network.

·         Some access methods may only work with specific topo